Explore Our Extensive Parts Catalog

Keith® Walking Floor® bearings are available for 3.5" slats and 6" slats. Each Keith® Walking Floor® bearing has two different cutout sizes for fitting over cross-members, 2-5/8" and 3-1/8".

The Keith® Walking Floor® Ball Valve is used to put the floor in neutral, when selected it sends the oil back to the tank.

The Keith® Walking Floor® Cylinders are 3.0" i.d. / 3.5" o.d . or 3.5" i.d. / 4.0 o.d.

The Keith® Walking Floor® Check Valve is used to change oil flow. There are two different Keith® Walking Floor® Check Valves. One has tubes clamped to it. The other one has JIC fittings attaching to it.

The Keith® Walking Floor® Control Valve controls the forward and reverse movement of the floor slats.

The Keith® Walking Floor® seal kits come in two sizes depending on size of cylinder.

Keith® Walking Floor® Cylinders can be ordered completely assembled. Need to know what size you are replacing.

The Keith® Walking Floor® seal kits come in two sizes depending on size of cylinder.

The Keith® Walking Floor® Rod, Piston & head assembly is available for 3.0 i.d. cylinder and 3.5 i.d. cylinder. Each Keith® Walking Floor® cylinder requires two, though you do not have to replace both.

The Keith® Walking Floor® Splash Guard Bearing is 60" long. The Keith® Walking Floor® Splash Guard Bearing is used to keep rock, dirt, slush etc. from getting into the floor slat and bearing area from under the cross-member area.

The Keith® Walking Floor® Switching Valve is the brain of the system keeping everything working together. There is only one Keith® Walking Floor® Switching Valve for all the Keith® Walking Floor® mobile hydraulic systems.

This Keith® Walking Floor® Hold-Down bearing is installed from under the subdeck, and due to the two wings it will assist holding the floor down between cross-members.